A hands-on compound bow tuning guide covering cam timing, cam lean correction, and rest setup so your arrows fly straight and your groups tighten up.
Tag Archives: nocking point
Bare shaft tuning shows you exactly what your bow is doing wrong. Follow these 7 steps to read the results and get perfect arrow flight and broadhead accuracy.
Your arrow meets the string at one tiny junction. Here’s how nocking points and D-loops work together to set arrow height, eliminate nock pinch, and keep every shot consistent.
Quick Answer: Paper tuning a compound bow means shooting an arrow through a suspended sheet of paper from about 6 to 8 feet away and reading the tear it leaves. A clean round hole means your arrow is flying straight. A tear with tails pointing up, down, left, or right tells you exactly which way […]
Learn how to tie a D-loop on a compound bow in 6 easy steps, with the right material, placement, length, and pro tips for a release-ready bowstring.
Recurve bow tuning made simple. Dial in brace height, tiller, nocking point, center shot, and bare shaft response for tight, repeatable groups.
A paper tuning chart shows exactly what your compound bow is doing wrong. This guide breaks down the 4 tear patterns and the exact fix for each.
Most compound accuracy mysteries trace back to worn string hardware. Here’s how to diagnose nocking point and d-loop failure before it costs you a tournament.
Your D-loop and nocking point are the smallest pieces of hardware on a compound bow — and the most consequential for accuracy. Here’s how to tie them, set them, and tune them right.
Setting up a recurve bow for beginners doesn’t need to be complicated, but getting each step right makes a real difference in accuracy and safety. Whether you just bought your first takedown recurve or you’re still deciding, this guide walks you through seven practical setup steps so you can start shooting with confidence. What Makes […]
- 1
- 2










